Product Categories
Rapid 7 to 17
34 product(s) found for "Theoben"
Show results as a:
Grid
List
Theoben Evolution Stainless Steel Cocking lever Button
Theoben evolution cocking lever button made of Stainless Steel or some call it a shoe. The standard one is just steel. Photo to follow.
£13.95
Theoben Rapid 7 Adjustable Hammer conversion Rapid 7
Adjustable Hammer conversion for the Rapid 7 later models that have a fixed hammer. This makes the hammer adjustable so you can adjust the locktime and control the power easier with a faster lock time,...
£7.95
Theoben Rapid 7 Adjustable Hammer in Stainless Steel inc inertia W & Spring + ..
Fully Adjustable Hammer (Advanced users) made of Stainless Steel for the Rapid 7. This is a Fully Adjustable hammer so you can adjust the engagement, travel lock-time and control the power easier with...
£39.95
Theoben Rapid 7 Heavier SS Inertia weight, spring & Xtra travel Spring Guide.
Theoben Rapid 7 Extra Heavy Stainless Steel Inertia weight & Stainless Steel spring with modified Steel Spring Guide to reduce hammer bounce. even more than the standard one. This has a recess in the front...
£14.50
Theoben Rapid 7 Heavy duty bottle O-Rings X 4
Theoben Rapid 7 Heavy duty bottle O-Rings Four times the sealing surface compared to the standard O ring. Especially for those who want the longest life or have trouble with bottle seal blowing when changing...
£6.00
Theoben Rapid 7 HIGH PRESSURE small bottle type schrader valves
Theoben Rapid 7 small bottle valves to fit the smaller rapid 7 bottle that has the Schrader Valve type. Pack of 2 supplied. These are the gold top special high pressure valves. Note These are not for the...
£14.99
Theoben Rapid 7 Inertia weight & spring
Theoben Rapid 7 Inertia weight & Stainless Steel spring to reduce hammer bounce.
£8.95
Theoben Rapid 7 later Adjustable Hammer in Stainless Steel inc inertia W & Spr..
New Later type hammer made adjustable, Adjustable Hammer made of Stainless Steel for the Later Rapid 7s with the match trigger. Check the photo to see if your hammer has the groove near the rear which...
£33.00
Theoben Rapid 7 Mk 1 & 2 Modified body + Ex valve and seals deal
Theoben Rapid 7 Modified plastic exhaust valve body with a larger hole and a matching stainless steel modified longer exhaust valve as a matched pair. Includes a set of seals and a sachet of Molycote 33...
£52.00
Theoben Rapid 7 Mk 1 & 2 Modified body ONLY
Theoben Rapid 7 Modified plastic exhaust valve body with larger hole. Direct replacement for the old Stainless Steel body or worn original item. It is always advisable to fit the valve body with a new...
£29.00
Theoben Rapid 7 MK1 & 2 Full Power Kit
Rapid 7 Kits Include four different hammer springs of varying strength + Sachet Moly 33 + Metal Spring Guide + lube + buddy bottle O rings and exhaust valve O ring, note that this is to prevent air leaking...
£39.95
Theoben Rapid 7 Modified Stronger exhaust valve with extended stem
Theoben Rapid 7 Modified Stronger exhaust valve with extended stem and shortened front to reduce valve bending. Made from stainless steel. It is usually advisable to fit the valve body with a new valve,...
£22.00
Theoben Rapid 7 Probe Adjustable Shim/Spring set
Theoben Rapid 7 Probe Adjustable Shim/Spring set to adjust the probe sealing. Comes with Four shims and two springs so you can adjust the pellet probe tension, and prevent the probe to barrel leaking....
£14.95
Theoben Rapid 7 Rear Adjuster in SS
Theoben Rapid 7 Rear Hammer Spring power adjuster with wide adjusting slot in Stainless Steel. Slot is 3.9mm wide by 14.25mm long. Available for the old and new Rapids. Select whether you have the old...
£16.95
Theoben Rapid 7 Regulator Washers X 10 at .5 mm thick
Theoben Rapid 7 Regulator Set of 10 Spring power adjuster washers. Theoben Rapid 7 Regulator Set of 10 Spring power adjuster washers. These are .5 mm thick and I have also put on some others at .7 mm thick....
£8.95
Theoben Rapid 7 Regulator Washers X 10 at .7 mm thick
Theoben Rapid 7 and other models, Regulator Set of 10 Spring power adjuster washers. These are .7 mm thick and I have also put on some others at 5. mm thick. These will give you even more control if you...
£8.95
Theoben Rapid 7 Seal kit + tools for the old Stainless Steel Body
Seal Kit and Tools for the Old Rapid 7s that have a Stainless Steel Body and not the Plastic one. (the plastic body has to be changed as a whole unit). This kit has 2 X Bottle O rings, 2 X White Exhaust...
£27.00
Theoben Rapid 7 Seal kit only for the old Stainless Steel Body
Seal Kit only for the Older Rapid 7s that have a Stainless Steel Valve Body and not the Plastic one. (the later plastic bodies have to be changed as a whole unit). Seal kit only for those who already have...
£21.45
Theoben Rapid 7 Set of 4 different Strength hammer springs
This is a set of four different strength hammer springs for the Theoben Rapid 7 models. From TR Robb Airgun Specialist. These can fit all variations of the Theoben models for all countries and Export models....
£18.50
Theoben Rapid 7 Set of two exhaust valve Springs
Rapid 7 Set of two exhaust valve springs of different strengths for advanced tuners.
£7.75