Theoben Rapid 7 Mk 1 or 2 etc Synthetic Mod Valve body

R7vb

£35.49 inc. tax

Theoben Rapid 7 Mk 1 or 2 etc Synthetic Mod Valve body

Add to Cart

Add To Wishlist

Theoben Rapid 7 Mk 1 or 2 etc Synthetic Mod Valve body Summary

Theoben Rapid 7 Mk 1 or 2 etc Synthetic Mod Valve body

Theoben Rapid 7 Modified plastic exhaust valve body and seals with a larger hole.
For Sub 12 and FAC types.
Does not include the Exhaust Valve, we recomend that both are replaced as a pair. Offered on its own for advanced tuners.
Easier to fit than the older Stainless Steel valve bodies.

Photo shows the exhaust valve for illustration purposes, but also is available as a pair on this site.

Includes a set of seals and a sachet of Molycote 33 for assembly.
Direct replacement for the old Stainless Steel body or the later standard Plastic original item.
It is always advisable to fit the valve body with a new valve, so you have a matched pair, as it is unlikely to seal unless you put a matched pair. This is offered for advanced tuners who know how to do Pre Charge guns.

Check power after fitting this high power set to make sure you do not exceed the power of your country. Power can be adjusted with the rear screw. Unscrewing will reduce power, or cutting a coil off the Hammer spring. If required we a set of four different hammer springs so you can set your gun just right. Ideally just under the 12 ft lb but easy to cock. Even FAC ones should not be hard to cock. The Exhaust vavles will bend if hit too hard even these stronger ones, so don't use brute force for tunging.

If you have a bent exhaust valve then you will certainly need to replace both. This is because the bent valve would have dented the old bodies sealing face.
Fits Mk 1 and 2 etc Rapids.

Brand:

T R Robb

Product Condition:

New

Updating Order Details

Please do not refresh or navigate away from the page!

Theoben Rapid 7 Mk 1 or 2 etc Synthetic Mod Valve body

Theoben Rapid 7 Mk 1 or 2 etc Synthetic Mod Valve body

Modal Dialog Title