Product Categories
SMK
39 product(s) found for "SMK QB/XS/TH 78/79"
Show results as a:
Grid
List
SMK XS 79* seal set.
Extra seals for the SMK XS 79 model. Photo shows the full set but this is for the extra seals that are for the 79.
£2.45
SMK QB/TH 78 S Steel A Frame Nylock nut and bolt X 1 set
1 X Stainless Steel Nylock Nut and Bolt for the A frame. Note this is a Stainless Steel Nylock nut and Bolt for extra strength and will not work loose. The photo shows our Stainless Nut and bolt compared...
£2.90
SMK QB/XS/TH 78/79 Modified easy fit Safety catch follower
SMK QB/XS 78/79 Modified easy fit Safety catch follower. I have made this with a much more pronounced, rather than the standard sharp pip. Makes operating the safety catch smoother and easier to fit and...
£4.50
SMK QB/XS/TH 78/79 Exhaust valve spring.
QB/XS 78 Exhaust valve spring. Photo show's our British made Spring and piercer in Stainless Steel for better flow. This is for the Spring only but you can add the Stainless Steel High Flow piercer in...
£5.75
SMK QB/XS/TH 78/79 Modified hammer block
Modified hammer/valve block for the SMK QB/XS 78/79 models made shorter to .600".
£5.95
SMK XS/QB/TH 501 Destroyer 5 X front cap seals
These are for the XS 78 models. This is a pack of 5 High Quality O rings and a small sachet of Moly 33 O ring lube. These fit the front cap. It is wise to Check and or change these on a regular basis to...
£6.00
SMK XS 79 5 X Nose seals for the 88 gram bottle
These are for the XS 79 models that use the 88 gram bottles only. This is a pack of 5 nose High Quality O rings and a small sachet of Moly 33 for the 88 gram Co2 bottle. It is wise to Check and or change...
£6.00
SMK QB/XS/TH 78/79 .177 Bolt probe O rings 5
.177 Bolt probe O ring pack of 5 to fit our modified bolt probe. For the .177 SMK QB/XS/TH 78/79 models that have our tuning kit fitted, as the standard seal is different. You can watch the video for free...
£6.00
SMK XS /QB/TH 5 X front cap Tough seals
These are Tougher and harder for the XS 78 models. This is a pack of 5 High Quality harder O rings and a small sachet of Moly 33 O ring lube. These fit the front cap and Brass valve body. It is wise to...
£7.00
SMK QB/XS/TH 78/79 Modified Stainless Steel piercer
Modified Stainless Steel piercer for the SMK QB/XS 78/79 models. Used in conjunction with our Piercer body improves efficiency for more power. You can watch the video for free on this site under SMK Stripdown...
£7.00
SMK QB/XS/TH 78/79 Middle rear cap in Stainless Steel.
Larger blanking plug in Stainless Steel. This is for looks only, it will not affect the power or accuracy. The photo shows the standard top one on the left, but this is for the cap below this top one....
£7.50
SMK TH 78 Longer stock Bolt Stud
Longer bolt stud made of Stainless Steel for the thumb hole stock. This bolt has a larger thread one end and a smaller thread the other to fit into the gun. If you want the nut in Stainless Steel as well...
£7.50
SMK QB/XS/TH 78/79 Longer or shorter etc. hammer spring
SMK QB/XS 78 hammer spring. Photo is to give you a general idea, as you can select a short, medium or long when you order. Special offer at the moment. More about these on the info site Here
£7.75
SMK QB/XS/TH 78/79 2 X Transfer Ports Higher Flow for the .177
SMK QB/XS/TH 78/79 2 X Higher flow Transfer Port seals for the .177 so you can get the .177 nearer the legal limit of 12 ft. lbs. You can fit these in the .22 if you live in a country with a higher limit...
£8.75
SMK QB/XS/TH 78/79 Stainless Steel Rear top cap
SMK XS QB TH 78/79 Rear Top Cap in Stainless Steel. This is for looks only and will not affect the power. I have left the top without the dovetail so you can use it as a scope stop, this will make it easier...
£8.95
SMK QB/XS/TH 78 Stainless Steel Front inner Body.
SMK QB/XS 78 Front Cap inner body only with special heavy duty O ring and the front screw changed to an Allen screw. The front cap is shown but is not included, this is for demonstration purposes. We now...
£9.95
SMK QB/XS/TH 78/79 Trigger Tuning Kit
Triggers should always be fitted or checked by a gunsmith when fitted by amateurs. Trigger Tuning Kit, for the SMK QB/XS 78/79 models, eliminates excessive movement you get with the standard trigger. Gives...
£9.95
SMK QB/XS/TH 78/79 2 X Ex Valve seals replacement for our mod exhaust valve
SMK QB/XS 78/79 seal replacement for our modified exhaust valve. This is for two exhaust valve seals that fit our modified exhaust valves. Our exhaust valve will unscrew so you can change the seal. Unlike...
£10.00
SMK QB/XS/TH 78 Stainless Steel Front cap and SSteel Screw
Special Deal of the Month Front cap for the SMK XS/QB78 made of high Quality Stainless Steel with a Stainless Steel Allen Screw and a good O ring. To fit you have to remove the front cap, grip the metal...
£11.50
SMK QB/XS/TH 78/79 Modified Piercer Body
Modified Piercer Body, High Flow for the SMK QB/XS 78/79 models. This does away with the tube, gauze, filter and steel washer. Do not try to fit the Tube, Filter, washer or gauze into our valve piercer...
£13.95