Product Categories
19 product(s) found for "SMK 501"
Show results as a:
Grid
List
SMK 501 5 X Heavy Duty front cap seals.
These are for the XS 501 models. This is a pack of 5 High Quality Heavy Duty O rings and a small sachet of Moly 33 O ring lube. These fit the front cap. It is wise to Check and or change these on a regular...
£6.00
SMK 501 Aluminium A Frame
SMK XT /XS 501 Aluminium A Frame with secure locking screws to lock the barrel and tube together for better accuracy. Replaces the standard plastic one where the barrel can move. Do not over tighten. Available...
£16.95
SMK 501 Exhaust Valve for more power and easy seal replacement.
SMK 501 Exhaust Valve for more power and easy seal replacement. For more power use our stainless Steel piercer but always check the power to make sure the gun does not exceed your limit, after changing...
£17.00
SMK 501 extra long reservoir bargain. Collected only
Collection only and so you can select what size (length) you want. Extra long Reservoir that can take up to one, two, three or even four 12G Co2 capsules, Not blued so is standard hydraulic tube self colour...
£32.00
SMK 501 Front & Rear Stud Screw in Stainless Steel
SMK XT/XS 501 Front stud screw and Rear Screw in Stainless Steel. Replaces the front screw so you can attach a sling or Harris type bi pod or both, without drilling the front of the stock. Photo only shows...
£13.95
SMK 501 Front End in Stainless Steel
501 Front assembly, does not include the release valve, spring, seal, etc but includes the front end including the cap, cover, Front body and O ring. Does not include the relief valve but you can Just...
£34.95
SMK 501 Front End in Stainless Steel BSP for Bulkfilling
501 Front end in Stainless Steel for bulk fill, This assembly does not include the relief valve, just use the standard one and the standard front retaining ring. Made of Stainless Steel with a 1/8th BSP...
£33.95
SMK 501 Front End in Stainless Steel complete
SMK XS 501 Front End in Stainless Steel complete Front body and Heavy Duty O ring. also includes the relief valve and grub screw, and Spring, and spring retainer. Photo shows the standard one below for...
£46.95
SMK 501 Front End in Stainless Steel No bleed
501 Front assembly without any release valve, does not include the release valve, spring, seal, etc but includes the front end including the cap, cover, Front body and O rings. Has two O ring grooves for...
£33.95
SMK 501 Front Stud only, Screw in Stainless Steel
SMK XT/XS 501 Front stud screw in Stainless Steel. Replaces the front screw so you can attach a sling or Harris type bi pod and or sling, without drilling the front of the stock. Photo only shows the front...
£9.95
SMK 501 inlet relief valve seal and SS carrier
501 Relief valve seal and Stainless Steel carrier. I have shown near the end of the pictures a standard brass carrier but this is for a Stainless Steel Carrier with the new seal and a small sachet of Molycote...
£11.95
SMK 501 inlet relief valve seal only
501 Inlet and or relief valve seal only. I have shown near the end of the pictures a standard brass carrier but this is for a new seal and a small sachet of Molycote 33 seal lubricant.
£6.95
SMK 501 Modified Piercer Body in Aluminium
Modified Piercer Body, High Flow for the SMK 501. This does away with the tube, gauze, filter and steel washer if fitted, although they have copied my design. Do not try to fit the Tube, Filter, washer...
£13.95
SMK 501 S. Steel Front Dome Cap
501 Front cap made of Stainless Steel. Low Price Bargain. Photo shows the Stainless Steel front cap for the SMK 501. This is to replace the standard plastic one that lets a good gun down. This gun has...
£12.50
SMK 501 Seal Set
501 Seal Kit full set including the exhaust valve seal to fit my Exhaust valve, and the large one for the reservoir bottom (SMK Call it a Frame seal). The front cap O ring is special for the front and...
£14.95
SMK 501 Silencer Adaptor
501 Silencer Adaptor in natural silver colour. Made to just slide over the barrel with Locktite to keep it straight without grub screws that pull it on the wonk. We have a special tool in the shop that...
£16.00
SMK 501 Stainless Steel hammer block
Stainless Steel Hammer block for the SMK 501. Made of tougher Stainless Steel.
£7.50
SMK 501 Stainless Steel Piercer
501 Stainless Steel Piercer made for better gas flow, as supplied in our tuning kit, to help with the power.
£7.95
SMK 501 Tuning kit
TR ROBB Airgun Specialist. SMK 501 Tuning and Service Kit. Professional Tuning parts Saves you bodging it up and makes it more reliable with British made parts. Includes modified exhaust valve with seal...
£33.50