Available for most popular guns, made in Stainless Steel or Steel for a precision fit, these Spring Guides are made longer if possible and will never break, they keep the spring from buckling. Unlike most standard Spring Guides that are loose fitting short standard plastic or rolled up tube (that can break) or rolled metal ones. Click on the options when ordering to select the gun that you have. Any not listed can be made especially.Too much Spring Guide? If you put too much Spring Guide in a gun then it can prevent it from cocking. I make our Spring Guides as long as possible, and it is easy to check if you have too much especially if you are using piston weights.
To check that the gun will cock, just drop the spring guide into the piston with any weights that you intend to use. If the rear of the spring guide does not touch the back of the piston, then it will not cock. I have added another two photos to show. The Last piston will still cock, while the one before that does not touch the rear of the piston will not. That is also assuming you have not put too much spring or weights in the gun.

Last Photo shows Stainless Steel Spring guides for Weihrauch HW 35 and I do a longer one is for the HW 80, Just select in the option tab. You can still fit the shorter one in the HW 80 but you cannot fit the HW 80 longer one in the HW 35 I have added the HW35 as well.

Select model from the drop down list below.