Product Categories
10 product(s) found for "Air Arms"
Show results as a:
Grid
List
Air Arms S200 Set of three hammer Springs
Air Arms S200 Set of three hammer Springs of different strengths so you can get the best performance and lock time. Photo of general springs, not necessarily the spring for the S200.
£12.95
Air Arms S200 Stainless Steel Cocking Pin and Rollers
Cocking Pin for the S200 with Stainless Steel Rollers. This is made of the tougher Stainless Steel so is less likely to break, as can happen with the mild steel one.
£14.95
Air Arms S300/S310/S410 2 different strength exhaust valve springs.
Pack of 2 different strength exhaust valve springs for advanced tuners. Always check the power to make sure the gun does not the legal limit.
£8.75
Air Arms S300/S310/S410 Adjustable Pot in Brass
Adjustable pot for the Air Arms S300 and 310 but it will fit straight on the S400/410 models to make that gun with an adjustable pot for more control over lock time etc. The pot on the later models is...
£10.95
Air Arms S300/S310/S410 Exhaust Valve Slightly longer for more power inc Moly ..
Air Arms S300/S310/S410 Exhaust Valve (some call it a firing Valve) made Slightly longer on the pin end and a fraction shorter on the spring holder end, for more opening time and control of lock time and...
£18.95
Air Arms S300/S310/S410 Index Post
Air Arms S310/S410 Index Post. These can break quite often so I would advise you to have a spare. The post is made of Brass with a copper spring, and it is usually the copper spring that breaks. These...
£11.50
Air Arms S300/S310/S410 Set of Four Hammer Springs
j Air Arms S300/S310/S410 Four different Strength hammer springs, ranging from low to strong strength. Photo is a general photo of Theoben hammer springs. The set here is for the S300/310/400/410 models,...
£18.75
Air Arms S300/S310/S410 Transfer port grub screws. S and L
Air Arms S300/S310/S410 Transfer port grub screws. Short and Long. This is for the short and long grub screw to adjust the power on the Air Arms models. They include a long and a short grub screw. The...
£4.95
Air Arms S300/S310/S410 Tuning Kit for UK and Export
Air Arms S300/S310/S410 Kits Include four different Strength hammer springs + 3 X Reservoir seals + lube + Molykote 33 grease for the seals. We also make a new Exhaust Valve made with a fraction longer...
£39.95
Air Arms S410 / S400 O ring seal set with lube Moly 33
O ring set for the Air Arms S300 to S410 including a sachet of Molycote 33 Seal lubricant. This set includes the large reservoir seals, Transfer port, Bolt barrel seals. Note: If your gun is leaking out...
£10.50