Weihrauch 97 / 77 Stainless Steel Stock nut B1332
HW 97sn
£22.95 inc. tax
Weihrauch 97 / 77 Stainless Steel Stock nut B1332
Stainless Steel Nut that goes into the rear of the HW 77/97 models. Holds the anti bear trap and then the stock screw. I have done a few photos to show you the different angles, but this is for one Stock Nut made of Stainless Steel.
When fitting these I always advise on my DVDs to screw the nut in by hand, so that you do not cross thread it.
I have found a lot of people tend to start using a spanner too early because they cannot do it up, and that maybe why it is not perfectly lined up and they may be struggling with holding the spring down. that is why I make the spring compressors, to make it easy.
Shown as B1332 on the exploded diagram. They call it a stock lug.
If yours is different then you can return with the one I sent you and I will make one in Stainless Steel and return.
Last photo is the one I do for a 97 with the 8mm thread.
When fitting these I always advise on my DVDs to screw the nut in by hand, so that you do not cross thread it.
I have found a lot of people tend to start using a spanner too early because they cannot do it up, and that maybe why it is not perfectly lined up and they may be struggling with holding the spring down. that is why I make the spring compressors, to make it easy.
Shown as B1332 on the exploded diagram. They call it a stock lug.
If yours is different then you can return with the one I sent you and I will make one in Stainless Steel and return.
Last photo is the one I do for a 97 with the 8mm thread.
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
items 0
Price £0.00
Checkout
Sorry, there are no blog posts at the moment. Please check back later.