Product Categories
16 product(s) found for "Gunsmiths Tools"
Show results as a:
Grid
List
88 gram test module or Remote supply
This is what we made to test if the 88 gram bottle is going to leak. It can save you the cost of an 88 gram gas cylinder which can cost up to 10.00 each (we sell them for 8.00 each). You can attach a hose...
£13.95
Air Arms Special reservoir end removal tool
New Air Arms S400 S410 pre charge rifle special valve removal tool for the later Air Arms, made for gunsmiths. Fits the ends of the reservoir to remove the front or rear bodies. This gives access to the...
£18.95
Airgun Spring Compressor Steel for professional use.
The Original Professional Steel Spring Airgun Spring Compressor made as my original design, but improved with large 25 mm square Steel Heads and very long travel (around 10 inches) screw and quick wind...
£125.95
Original/Diana/RWS Target Tool for gear removal.
Special tool to remove the piston gear pinion holder, on the side of the cylinder. This is for the recoiless rifles and pistols that have two pistons for recoiless mechanisms. For the Original / Diana...
£13.95
Sheridan Benjamin Special Tools for the pump up type
I have made a special tool out of Stainless Steel to dismantle the Sheridan and Benjamin Pump up rifles and pistols that have the valve unit braised into the cylinder. The special tools consist of the...
£34.95
SMK 501 Special tool for removing the valve body.
Special tool made for removing the Piercer Body on the XS T 501. This allows you to remove the Piercer body easier without damaging the piercer body because it fits the SPECIALLY slotted groove exactly....
£19.95
SMK 700W Pistol GreenGrip Special Stainless Steel Tool
SMK PP700W Green Grip W Pre Charge pistol Stainless Steel special tool to remove the barrel housing/Silencer shroud and the rear valve retainer. Allows you to dismantle these parts without messing them...
£13.95
SMK 700W Special Stainless Steel Tool for Pressure gauge removal
Special Stainless Steel Tool for the removal of the front pressure gauge. Both tools are shown including the other SS tool for the removal of the front barrel cap. This is available as well if you click...
£24.95
SMK 900 Rifle Stainless Steel special tool Pressure gauge. 19.00 mm
SMK 900 Pre Charge Rifle Stainless Steel special tool (19.00 mm across the flats) to remove the pressure gauge so you can dismantle the rifle without damage. This fits the pressure gauge but will also...
£24.95
SMK 900 Rifle Stainless Steel special tool Pressure gauge. 23.75 mm
SMK 900 Pre Charge Rifle Stainless Steel special tool (23.75 mm across the flats) to remove the pressure gauge so you can dismantle the rifle without damage. This fits the pressure gauge but will also...
£24.95
SMK Artemis PP700S Pre Charge target pistol Pressure gauge removal tool
New Artemis PP 700 Pre Charge target pistol Special tool to remove the pressure gauge. Do not over tighten the pressure guage as it is not very strong.
£24.95
SMK Artemis Pre-Charge target Special Tool
Artemis Pre-Charge target pistol Special tool too remove the front cap. Made of Stainless Steel. The Tool is shown at the bottom of the picture along with our Silencer adaptor. Precision Barrels to order....
£14.95
SMK QB/XS/TH 78 Special tool for removing the valve body.
Special tool made long enough for removing the Piercer Body on the QB or XS 78. This allows you to remove the piercer body easier without damaging the piercer body because it fits the slotted groove exactly....
£15.00
Transfer Port Reamer
Long Transfer Port reamer with the correct angle for reaming from inside the cylinder. Ream from inside until you just start to take metal off at the exit, so it still looks the same size as before you...
£54.95
Walther R8 Special reservoir end removal tool
Walther R8 pre charge rifle special valve removal tool for the Walther R8 Pre charge air rifle. For gunsmiths or dabblers. The air gun magazines say the the R8 is not a regulated gun, but they ARE regulated....
£19.00
Webley Axor Special Tool for Exhaust Valve
Webley Axsor special tool to remove the exhaust valve retaining disc that has six holes in it for a two pin tool.
£14.95