AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLE
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XCG
XOF
XPF
YER
ZAR
ZMW
ZWG
ZWL
Default
France
German
Sharp Innova Piston head conversion to O ring in Stainless Steel
Ssip
£25.32 inc. tax
Sharp Innova Piston head conversion to O ring in Stainless Steel
For Pump Head Only, see the options tab if you want any extras.
Pump head conversion for the Sharp types like Innova and Ace. This converts the pump head to an O ring that is easily replaceable, this is because you cannot buy the standard cup washer. Our pump head is made of Stainless Steel and has the small hole in the centre so that the relief valve still works, and the gun does not exceed our legal limit. If you live in countries that does not have a limit then this can be blocked or we can supply for export only the pump head without the hole, but this will make the gun a lot less reliable.
To fit this conversion you have to tap a half inch UNF thread into the hole where you have removed the cup washer, do not do it freehand but use a lathe to make sure it lines up. This is quite easy as the vacant hole is OK. I have made a couple of the holders in Stainless Steel already tapped to take our conversion at a very low price of £19.99, and you can add it under the options tab
We can do this for you if you give us the pump head only, (note: not the gun).
Note: I have been informed that the copies of the Innova like the Webley Rebel have a larger hole in the piston for the cup washer and would need a larger thread than the 1/2" UNF supplied on this, so this mod is not suitable for the copies only the Sharp Innova and Ace types as mentioned earlier.
If you want one made then bring in the old one for me to get the dimensions.
Pump head conversion for the Sharp types like Innova and Ace. This converts the pump head to an O ring that is easily replaceable, this is because you cannot buy the standard cup washer. Our pump head is made of Stainless Steel and has the small hole in the centre so that the relief valve still works, and the gun does not exceed our legal limit. If you live in countries that does not have a limit then this can be blocked or we can supply for export only the pump head without the hole, but this will make the gun a lot less reliable.
To fit this conversion you have to tap a half inch UNF thread into the hole where you have removed the cup washer, do not do it freehand but use a lathe to make sure it lines up. This is quite easy as the vacant hole is OK. I have made a couple of the holders in Stainless Steel already tapped to take our conversion at a very low price of £19.99, and you can add it under the options tab
We can do this for you if you give us the pump head only, (note: not the gun).
Note: I have been informed that the copies of the Innova like the Webley Rebel have a larger hole in the piston for the cup washer and would need a larger thread than the 1/2" UNF supplied on this, so this mod is not suitable for the copies only the Sharp Innova and Ace types as mentioned earlier.
If you want one made then bring in the old one for me to get the dimensions.
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
items 0
Price £0.00
Checkout
Sorry, there are no blog posts at the moment. Please check back later.
