Product Categories
Theoben Rapid 7 Mk 1 & 2 Modified body + Stronger Ex valve and seals deal
R7bv
£52.00 inc. tax
Theoben Rapid 7 Mk 1 & 2 Modified body + Stronger Ex valve and seals deal Summary

Theoben Rapid 7 Mk 1 & 2 Modified body + Stronger Ex valve and seals deal

Theoben Rapid 7 Modified plastic exhaust valve body with a larger hole and a matching stainless steel modified longer exhaust valve as a matched pair. Exhaust Valve is made a fraction stronger and longer for all models. Sub 12 and FAC types.

Easier to fit than the older Stainless Steel valve bodies.

Includes a set of seals and a sachet of Molycote 33 for assembly.
Direct replacement for the old Stainless Steel body or the later standard Plastic original item.
It is always advisable to fit the valve body with a new valve, so you have a matched pair, as it is unlikely to seal unless you put both in.

Check power after fitting this high power set to make sure you do not exceed the power of your country. Power can be adjusted with the rear screw. Unscrewing will reduce power, or cutting a coil off the Hammer spring. If required we a set of four different hammer springs so you can set your gun just right. Ideally just under the 12 ft lb but easy to cock. Even FAC ones should not be hard to cock. The Exhaust vavles will bend if hit too hard even these stronger ones, so don't use brute force for tunging.

If you have a bent exhaust valve then you will certainly need to replace both. This is because the bent valve would have dented the old bodies sealing face.
Fits Mk 1 and 2 etc Rapids.
Brand:
T R Robb
Product Condition:
New
Product Added to your Cart
x

-------- OR --------