New SMK CP2 Co2 target pistol Stainless Steel Valve body. Exhaust Valve and cap also available. Includes Front and rear and pointed piercer and nut but not the seals. Seal sets are available on this site....

SMK PR 900 CP 1 / CP2 Extra lond slip on to match the barrel diameter Silencer Adaptor to use a standard 1/2 inch UNF silencer like the HW which I tested and found to be very good. Use Locktite or similar...

SMK CP 1 and 2 Longer Stainless Bolt Probe and larger Bolt Handle for .22 or .177 the .177 is made 1.5 mm longer. Clears Transfer port for more power and accuracy. To get the best it is best to have a...

Silencer Adaptor Made from Aluminium for lightweight. Fixes to barrel with Locktite so it sets more accurately than those that use a grub screw that will pull it to one side. These are Made with the standard...

SMK PR 900W CP 1 and 2, A Frame to secure the front for better accuracy and stop any flex of the thin barrel. SMK 900 additional A Frame For better accuracy and laser or lamp dovetail. Has two grub screws...