Product Added to your Cart
x

-------- OR --------

22 product(s) found for "SMK 501"
Show results as a:
Grid
List
SMK 501 Front trigger Allen dome Screw
SMK XT/XS 501 Front Screw with an Allen dome head. Better than the standard Phillips furniture screw.
£6.25
SMK 501 Rear Forward shorter trigger Allen dome Screw
SMK XT/XS 501 Trigger Guard Screw with an Allen dome head. Better than the standard Phillips furniture screw. This is the short one that is at the front of the Plastic Trigger Guard. I have added the longer...
£6.25
SMK 501 5 X Heavy Duty front cap seals.
These are for the XS 501 models. This is a pack of 5 High Quality Heavy Duty O rings and a small sachet of Moly 33 O ring lube. These fit the front cap. It is wise to Check and or change these on a regular...
£7.00
SMK 501 inlet relief valve seal only
501 Inlet and or relief valve seal only. I have shown near the end of the pictures a standard brass carrier but this is for a new seal and a small sachet of Molycote 33 seal lubricant. Special tool to...
£7.95
SMK 501 Stainless Steel Piercer
501 Stainless Steel Piercer made for better gas flow, as supplied in our tuning kit, to help with the power.
£8.95
SMK XS 78/79/501 Stainless Steel Piercer
501 Stainless Steel Piercer made for better gas flow, as supplied in our tuning kit, to help with the power.
£8.95
SMK 501 Stainless Steel hammer block
Stainless Steel Hammer block for the SMK 501. Made of tougher Stainless Steel.
£9.50
SMK 501 Front Stud only, Screw in Stainless Steel
SMK XT/XS 501 Front stud screw in Stainless Steel. Replaces the front screw so you can attach a sling or Harris type bi pod and or sling, without drilling the front of the stock. Photo only shows the front...
£10.95
SMK 501 inlet relief valve seal and SS carrier
501 Relief valve seal and Stainless Steel carrier. I have shown near the end of the pictures a standard brass carrier but this is for a Stainless Steel Carrier with the new seal and a small sachet of Molycote...
£12.95
SMK 501 Relief Valve Seal + Tool for easy seal replacement.
SMK 501 Relief Valve Seal and Tool for easy seal replacement without damage. Trying to fit the relief valve seal is very hard so I have made this tool to make it easy. When fitting the seal make sure the...
£13.96
SMK 501 Front & Rear Swivel Stud Screw in Stainless Steel
SMK XT/XS 501 Front Swivel stud screw and Rear Screw in Stainless Steel. Replaces the front screw so you can attach a sling or Harris type bi pod or both, without drilling the front of the stock. Photo...
£14.95
SMK 501 Seal Set
501 High Quality Seal Kit full set including the exhaust valve seal to fit my Exhaust valve, and the large one for the reservoir bottom (SMK Call it a Frame seal). The front cap O ring is special for the...
£16.89
SMK 501 Modified Piercer Body in Aluminium
Modified Piercer Body, High Flow for the SMK 501. This does away with the tube, gauze, filter and steel washer if fitted, although they have copied my design. Do not try to fit the Tube, Filter, washer...
£16.95
SMK 501 Silencer Adaptor
501 Silencer Adaptor in natural silver colour. Made to just slide over the barrel with Locktite to keep it straight without grub screws that pull it on the wonk. We have a special tool in the shop that...
£17.00
SMK 501 Exhaust Valve for more power and easy seal replacement.
SMK 501 Exhaust Valve for more power and easy seal replacement. For more power use our stainless Steel piercer but always check the power to make sure the gun does not exceed your limit, after changing...
£18.00
SMK 501 S. Steel Front Dome Cap
501 Front cap made of Stainless Steel. Low Price Bargain. Photo shows the Stainless Steel front cap for the SMK 501. This is to replace the standard plastic one that lets a good gun down. This gun has...
£19.22
SMK 501 Aluminium A Frame
SMK XT /XS 501 Aluminium A Frame with secure locking screws and rubber cushions (inserted before the grub screws), to lock the barrel and tube together for better accuracy. Replaces the standard plastic...
£20.95
SMK 501 Stainless Steel Bolt Probe with 1mm longer probe + O ring seal
501 Stainless Steel .22 Bolt Probe. SMK 501 Stainless Steel Bolt Probe with longer probe nose of just over 1mm + so you can blueprint your Bolt Probe to Pellet for greater efficiency. I will also put the...
£22.95
SMK 501 Tuning kit
TR ROBB Airgun Specialist. SMK 501 Tuning and Service Kit. Professional Tuning parts Saves you bodging it up and makes it more reliable with British made parts. Includes modified exhaust valve with seal...
£35.50
SMK 501 Front End in for Bulk filling
SMK 501 Now also named Rabbit Destroyer. Bulk Fill Adaptor. For Co2 or Air Front end in Brass with Stainless Steel Screw Cap for bulk fill, This assembly includes a none return valve. Made of Brass with...
£36.95
SMK 501 Front End in Stainless Steel without the relief valve etc.
501 Front assembly, without the release valve, spring, seal, etc but includes the front end including the cap, cover, Front body and O ring. Does not use the relief valve. Reduces the risk of gas leak...
£39.95
SMK 501 Front End without the Dome Cap in Stainless Steel complete
SMK XS 501 Front End in Stainless Steel complete Front body and Heavy Duty O ring. also includes the relief valve and grub screw, and Spring, and spring retainer. Photo shows the standard one below for...
£49.99
Shopping Basket
items 0
Price £0.00
Checkout