Product Categories
Sharp Innova Piston head conversion to O ring in Stainless Steel
Ssip
£24.00 inc. tax
Pump Head holder in Stainless Steel already thread
Sharp Innova Piston head conversion to O ring in Stainless Steel Summary

Sharp Innova Piston head conversion to O ring in Stainless Steel

Pump head conversion for the Sharp types like Innova and Ace. This converts the pump head to an O ring that is easily replaceable, this is because you cannot buy the standard cup washer. Our pump head is made of Stainless Steel and has the small hole in the centre so that the relief valve still works, and the gun does not exceed our legal limit. If you live in countries that does not have a limit then this can be blocked or we can supply for export only the pump head without the hole, but this will make the gun a lot less reliable.
To fit this conversion you have to tap a half inch UNF thread into the hole where you have removed the cup washer, do not do it freehand but use a lathe to make sure it lines up. This is quite easy as the vacant hole is OK. I have made a couple of the holders already tapped to take our conversion, and you can add it under the options tab
(at £20.95).
We can do this for you if you give us the pump head only, (note: not the gun).
Note: I have been informed that the copies of the Innova like the Webley Rebel have a larger hole in the piston for the cup washer and would need a larger thread than the 1/2" UNF supplied on this, so this mod is not suitable for the copies only the Sharp Innova and Ace types as mentioned earlier.
If you want one made then bring in the old one for me to get the dimensions.
Product Condition:
New
Product Added to your Cart
x

-------- OR --------