Product Categories
SMK 501 Exhaust Valve for more power and easy seal replacement.
501kt
£17.00 inc. tax
Stainless Steel Piercer for better gas flow.
SMK 501 Exhaust Valve for more power and easy seal replacement. Summary

SMK 501 Exhaust Valve for more power and easy seal replacement.

SMK 501 Exhaust Valve for more power and easy seal replacement. For more power use our stainless Steel piercer but always check the power to make sure the gun does not exceed your limit, after changing any parts.
Fits both calibres .177 and .22.

When fitting the seal to our valve, just unscrew the shaft from the brass head, then pick out the seal. Push in the new seal with the larger hole facing outwards and the smooth side facing outwards, then put a tiny amount of Locktite on the threads of the shaft and screw in the shaft until it is level. Do not over tighten so it is distorting or pulling the seal inwards. Just look from the side to see that the seal is flat across but with no gap behind the flange. If you have trouble holding the stainless steel shaft, then it can be held in a drill chuck, and wet and dry can be used to give a grip on the brass head. 
Now also named Rabbit Destroyer
Brand:
T R Robb
Product Condition:
New
Product Added to your Cart
x

-------- OR --------