Adjustable Pellet Sizer Stainless Steel .177 & .22 with SS Round ejector
Our Adjustable Pellet sizer in High quality Stainless Steel Body and Round ejector plate, the picture now Shows the sizer fitted with the two outer Allen screws made of Stainless steel.
Designed to always keep the front a fraction smaller than the rear, for optimum accuracy, power and velocity. Available in .177 and .22 - .20 and .25 to order.
Pushing a pellet through a standard die will create a pellet that has the front the same size as the rear. This will cause extra drag. Our adjustable sizer will always keep the front a few thousands of an inch smaller for maximum power and accuracy.
Comes with the brass pusher (not show) for pushing the pellet into the sizer stop.
How to use our sizer instructions are shown on this site.
Under the heading: Using our adjustable Pellet Sizer.
By counting the number of turns on the adjuster you can set the adjustable sizer for different guns and or pellet combinations.
The sizers are calibre specific so you need one for each calibre. the sizer has a full range for that Specific calibre, that is .177 > (4.5 mm) .20 > (5 mm) .22 > (5.5 mm) .25 > (6.35 mm).