First come basis. There has been a lot more work than I intended but I wanted to make them much better and stronger than the standard weak ones. These are not cast, but machined from solid Aluminium. But...

SPRING BARGAIN OFFER for those that can do advanced gunsmith work, if not then let your competent gunsmith do it for you. Crosman Extra wide Satin finish Trigger 8mm wide , Smooth finish and includes our...

Trigger Knurled Steel Pin to make it easier to assemble. Can be pressed into trigger and Trigger spring so it does not keep falling apart when you are trying to assemble the trigger parts. Put trigger...

Feinwerkbau Sport trigger pin. Photo shows a standard pin but it will be a new pin made from carbon steel. Includes slave pin for assembly. Open normally Wednesdays 10.30 till 3.30 pm.

Rear Set 6 mm wide Stainless Steel trigger for the HW Record type triggers. The standard one is made of a soft alloy like mazak, these can crack around the pivot hole or just break. I have made this trigger...

Rapid 7 Polished top and bottom sears with polished contact faces with slave pin to aid assembly into gun. The top sear is slightly thicker than the earlier and a lot of the later ones. Keep the slave...

Early Airsporter MK 1 or 2 Trigger Spring. Lubricate with moly Grease.

I have made a Sharp Innova Trigger Pin in Carbon steel as they are not available anymore.

Trigger slave pin for easier assembly. It is extremely hard to put the trigger unit in the gun unless you have the correct slave pin, so I have included it with the trigger parts. Keep the slave pin safe...

Rapid 7 Set of the four trigger springs, also includes the slave pin (for easier assembly) of the Rapid 7 trigger. Keep the slave pin safe so you can use it later if ever you need to remove or dismantle...

Triggers should always be fitted or checked by a gunsmith when fitted by amateurs. Lighter trigger pressure spring. I have put the standard one next to our lighter spring for comparison. This is for the...

SMK XT/XS 501 Trigger Guard Screw with an Allen dome head. Better than the standard Phillips furniture screw. This is the short one that is at the front of the Plastic Trigger Guard. I have added the longer...

Feinwerkbau Sport trigger spring, Long or Short. This spring goes into the front hole of the Trigger. The longer one goes on the top under the safety catch. See photo. Select what ones you want in the...

Early Airsporter MK 2 Trigger Sears (Top and Bottom) in Stainless Steel. Includes Moly Grease. Lubricate with moly Grease.

Triggers should always be fitted or checked by a gunsmith when fitted by amateurs. Trigger Tuning Kit, for the SMK QB/XS 78/79 models, eliminates excessive movement you get with the standard trigger. Gives...

Trigger internal parts complete with springs trigger sear etc, also includes the slave pin (for assembly) of the Rapid 7. DOES NOT INCLUDE THE RAPID TRIGGER HOUSING. The trigger is in a housing to help...

SMK QB/XS 78/79 Solid Stainless Steel , 6mm wide, rear set Trigger to make the trigger position much more comfortable and to give smoother and easier control of the trigger pull. If you want try the feel...

Weirhauch Rear Set Trigger, Satin finish, not polished for you to finish how you like. Some shooters like a satin finish for extra grip, but also to save money as these are cheaper. Rear Set Stainless...

Bargain price. Stainless Steel Rear set trigger with the sear faces polished and the rest with a satin finish. also Includes our trigger tuning kit with ball ended spring guide, shims, wet & dry,Allen...

Crosman Adjustable Trigger tuning kit for 2250/2250B/2240, Ratcatcher and Rat buster Should be fitted or checked by a competent gunsmith. This is for the Trigger Kit Only See trigger and kit if you want...

Crosman Safety Spring and Ball for Trigger 2240/2250 Ratcatcher and Rat buster Watch Free video below to see how easy it is, but we would say have it checked by a gunsmith to make sure it is safe. Click...

SMK XT/XS 501 Front Screw with an Allen dome head. Better than the standard Phillips furniture screw.

Webley Mk 3 lug for the stock screw. This lug has the Left Hand thread to screw in to the trigger block. The stock screw screws into this.

New SMK CP1 Co2 target pistol Barrel (in the white, not blued) made to fit. These are made to order. Call in to buy, or give an RFD address for delivery (UK). Barrel length is limited to 10 inch in the...

I have made a Sharp Innova Brass knurled nut with centre screw in Stainless Steel. You can also add a trigger pin under the options tab.

BSA Scorpion Pistol Trigger Sear centre holder. Designed to self align unlike the standard one which tends to break. See drawing Normally made of Nylon but is weak, I have these extra strong ones in Nylon...

Crosman 2240-2250 Safety Spring+ Ball+ moly grease, These are very small and easily lost. The easiest way to fit is to remove the front and rear screw that hold the trigger housing, then remove the housing....

Extra long Reservoir, Blued and comes with Allen trigger screw and also comes with an adjustable piercer, so you can use one/two/three or four 12 gram Co2 bottles. If you bulk fill (with my bulkfill adaptor...

Walther LGV and LGU Air Rifle See photo. Piston weight set for fine tuning the LGV. This consists of one top hat made of steel and two plain piston weights so you can set your gun close to the limit of...

Extra long Reservoir has slight markings, so reduced to 64.75. Blued and comes with Allen trigger screw, also comes with an adjustable piercer, so you can use one/two/three or four 12 gram Co2 bottles....

New Later type hammer made adjustable, Adjustable Hammer made of Stainless Steel for the Later Rapid 7s with the match trigger. Check the photo to see if your hammer has the groove near the rear which...

Adjustable Hammer made of Stainless Steel for the Rapid 7. This makes the hammer adjustable so you can adjust the lock-time and control the power easier with a faster lock time and closer to 12, this also...

Special tool made long enough for removing the Piercer Body on the QB or XS 78. This allows you to remove the piercer body easier without damaging the piercer body because it fits the slotted groove exactly....

Special Deal of the Month Our Modified Exhaust Valve designed for more power, for the SMK QB/XS/TH 78/79 models. Ours have a Stainless Steel shaft rather than the standard mild steel one. Also comes with...