I have found another Crosman Rear Dovetail for the Crosman Models 2240/2250/2260 in plain metal colour. For the Crosman 2250/2260 so it may show some shop soiled marks but you should be able to polish...

Crosman power dial, Colour is natural Aluminium colour. Allows you to turn the power Up and Down after tuning, Useful when shooting in a barn to prevent damage to roof or over penetration. Includes new...

New Tuned for more volume and flow, Genuine Crosman Valve and Body unit for Crosman 2240 pistol and 2250 Ratcatcher and 2260 Rabbit stopper models. They include the Exhaust Valve and return spring so are...

Crosman 2240 Front Cap in Stainless Steel. I have also done some that are threaded for a rod so that they can fit the the 2250 and 2260. Please enquire if you want that type. Photo shows the Crosman 2240...

Crosman Hammer spring and Spring guide For the Crosman Rat Catcher 2250, Rabbit Stopper 2260 and Pistol 2240, Can be used when your old hammer spring goes soft or has broken or you are tuning the gun....

Crosman 2240-2250 Safety Spring+ Ball+ moly grease, These are very small and easily lost. The easiest way to fit is to remove the front and rear screw that hold the trigger housing, then remove the housing....

Crosman Valve Body Collets to unscrew the valve body without marking. This is for two collets to grip the Valve Body so you can get the exhaust valve and spring out of the valve body for tuning or servicing....

SOLD OUT Crosman A frame with an 11 mm dovetail top & bottom for accessories like Laser sight etc. Approximately 12 mm thick. Special offer of adding an extra A frame so you can mount them apart to give...

Crosman longer higher power bolt probe and O ring seal with a Crosman 2240/50/60 Longer bolt probe with a Larger 15mm Stainless Steel Polished ball handle, The Longer probe gives maximum flow and power....

Crosman 16mm Larger ball handle and longer bolt probe for higher Power with a Stainless Steel Polished handle that screws together,not riveted into the brass Probe which can easily break, and the probe...

For the Crosman Rat Catcher 2250, Rabbit Stopper 2260 and Pistol 2240, set of four Hammer Springs including a magnum spring. The magnum spring may be too long but can be shortened as required. Photo is...

Crosman Discovery and King Ratcatcher Modified Exhaust Valve. The standard exhaust valve does not dismantle so you cannot change the seal. Ours is modified so you can unscrew the stem from the head for...

Benjamin and Crosman King Rat Catcher Modified Exhaust valve, fraction longer than standard, but can also be unscrewed to replace the seal, unlike the original standard one. If you want one for a Benjamin...

Crosman Stock, fits 2240 Pistol and 2250 Ratcatcher. Fitted to the 2240 pistol or Pump up it makes it a lot easier to shoot. And if you fit our longer barrel you can increase the power.

Before tuning we recommend that you fit our Rear Dovetail block for maximum efficiency or the Longer Bolt probe. Crosman Rabbit Stopper/Ratcatcher tuning kit. Includes: Set of 3 different strength springs...

Crosman 2240/2250/2260 2 X High Quality Co2 Bottle Seals and a small sachet of seal Lube. This is to fit my metal Stainless Steel Valve body but can also be fitted into the standard valve body if you take...

Modified Exhaust Valve Seals. Made to fit our Modified Exhaust Valves. Most standard exhaust valves do not dismantle, but these are our seals I make to fit our modified Exhaust Valves. Most of our Exhaust...

Crosman Large bore Steel transfer port for high power, for the Rat Catcher, 2250/2260 Rabbit Stopper, Discovery and 2240 pistol. It may also fit similar models that have the plastic breech. Don't forget...

Crosman Safety Spring and Ball for Trigger 2240/2250 Ratcatcher and Rat buster Watch Free video below to see how easy it is, but we would say have it checked by a gunsmith to make sure it is safe. Click...

Crosman Heavy Duty Transfer Port Seal for the Rat Catcher 2250/2260 Rabbit Stopper and 2240 pistol. This is for the Blue or Green Transfer Port seal only. Transfer Port is slightly a slightly tighter fit...

SPRING BARGAIN OFFER for those that can do advanced gunsmith work, if not then let your competent gunsmith do it for you. Crosman Extra wide Satin finish Trigger 8mm wide , Smooth finish and includes our...

Crosman Seal set for the Rat Catcher 2250/2260 Rabbit Stopper and 2240 pistol. This kit includes all the seals for these guns including the Co2 bottle seal and Exhaust valve seal. The later seals are not...

Crosman 2240, 2250 (but not King Rat) 2260 Stainless Steel Valve. Made so you can change the seal easily by just unscrewing the front and replacing the seal. For King Rat select it under the options tab....

Crosman Stainless Steel High Performance Valve body and Stainless Steel Screw. Made so you can change the Co2 bottle seal easily by just unscrewing the front and replacing the Co2 seal. Also has improved...

Before tuning we recommend that you fit our Longer Bolt probe for more effiecent gas flow. Set of 4 different strength springs including the new magnum spring. You can add the longer Bolt Probe under the...

Crosman Adjustable Trigger tuning kit for 2250/2250B/2240, Ratcatcher and Rat buster Should be fitted or checked by a competent gunsmith. This is for the Trigger Kit Only See trigger and kit if you want...

SMK QB/XS 78/79 Modified Brass Valve body to fit our modified piercer body (our thread is imperial) but our piercer body is dual thread so will fit both metric and imperial. There is not a lot of differnce...