AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BYR
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRO
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XOF
XPF
YER
ZAR
ZMW
ZWL
Default
France
German
SMK 700 Artemis Pistol Silencer Adaptor Nat ally silver.
Artsa
£25.95 inc. tax
SMK 700 Artemis Pistol Silencer Adaptor Nat ally silver.
Artemis PP700 (BLACK GRIP, IF YOU HAVE THE GREEN GRIP 700 THEN ORDER THAT ONE) (THESE WILL NOT FIT THE GREEN GRIP See Photo for measurements) Pre-Charge target pistol Silencer adaptor in natural Ally silver so you can use the HW or good Silencer, for real sound reduction. Improved again for better sound reduction with the HW Silencer and built in noise reducer.
Easy fitting shown on Youtube:
https://www.youtube.com/watch?v=_kEbe6ToVBw
Copy and paste the above or click on the link above.
It is easy to have an Artemis with any calibre just change the barrel. If you are going up in calibre it is more important to make sure the power has not gone over the power limit of your country. See last photo for barrel. My barrels are very high quality and very accurate.
We also make the special tool too remove the front cap to fit our silencer adaptor which is only £13.95 when purchased with the adaptor, select the option below if you want that as well.
Knurled Cap thread protector is available for only £6.50 or two for £13.50 when ordered with the adaptor instead of the normal price of £9.00.
Note that this is different from the other 700 (Greengrip) in that it has a black grip and open sights. The other 700 has a green grip, Make sure you know which one you have before ordering.
I had one Artemis last week (I have done a lot but this was the first one) that would not undo, the threaded collar at the rear just kept turning. So I made a brass tapered one and that worked good. I think I have already put them on this site and mentioned this problem that is rare.
If you want the front removed when you buy the Silencer adaptor then bring it in the shop when open and I can undo it for you. Or you can order the special tool in Stainless Steel under the options tab when you order the adaptor.
The threads are normally OK on the Artemis but I have put truing dies on this site, just in case you need them.
I have put a fixed die on this site now under the options tab. They are only cheap ones but should be able to refresh and correct any dodgy threads., but I have not had any trouble now for years so I presume that must have been just teething trouble with a new model. All later models have had good threads.
Do not assemble with pliers or Mole grips or you will distort the precision made part. Only use the correct tools for dis assembly and assembly.
I have now made the special tool for removing the Exhaust Valve. It will be under the options tab when you order.
Note for Greece:
You are not allowed Silencers.
Easy fitting shown on Youtube:
https://www.youtube.com/watch?v=_kEbe6ToVBw
Copy and paste the above or click on the link above.
It is easy to have an Artemis with any calibre just change the barrel. If you are going up in calibre it is more important to make sure the power has not gone over the power limit of your country. See last photo for barrel. My barrels are very high quality and very accurate.
We also make the special tool too remove the front cap to fit our silencer adaptor which is only £13.95 when purchased with the adaptor, select the option below if you want that as well.
Knurled Cap thread protector is available for only £6.50 or two for £13.50 when ordered with the adaptor instead of the normal price of £9.00.
Note that this is different from the other 700 (Greengrip) in that it has a black grip and open sights. The other 700 has a green grip, Make sure you know which one you have before ordering.
I had one Artemis last week (I have done a lot but this was the first one) that would not undo, the threaded collar at the rear just kept turning. So I made a brass tapered one and that worked good. I think I have already put them on this site and mentioned this problem that is rare.
If you want the front removed when you buy the Silencer adaptor then bring it in the shop when open and I can undo it for you. Or you can order the special tool in Stainless Steel under the options tab when you order the adaptor.
The threads are normally OK on the Artemis but I have put truing dies on this site, just in case you need them.
I have put a fixed die on this site now under the options tab. They are only cheap ones but should be able to refresh and correct any dodgy threads., but I have not had any trouble now for years so I presume that must have been just teething trouble with a new model. All later models have had good threads.
Do not assemble with pliers or Mole grips or you will distort the precision made part. Only use the correct tools for dis assembly and assembly.
I have now made the special tool for removing the Exhaust Valve. It will be under the options tab when you order.
Note for Greece:
You are not allowed Silencers.
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
items 0
Price £0.00
Checkout
Sorry, there are no blog posts at the moment. Please check back later.
