Product Added to your Cart
x

-------- OR --------

Sub-Categories
35 product(s) found for "Precision Tuning & Custom Parts"
Show results as a:
Grid
List
Adjustable pellet seater in Brass
Adjustable pellet seater, for Break Barrel Airguns, Can be used for all calibre's for greater accuracy and power. If you count the number of turns then you can set it for all the different guns that you...
£11.96
Adjustable pellet Sizer
Adjustable pellet seater, for Break Barrel Airguns, Can be used for all calibre's for greater accuracy and power. If you count the number of turns then you can set it for all the different guns that you...
£38.96
BSA Mercury S 17 mm Silencer Adaptors
Silencer Adaptor Made from Aluminium for lightweight. Fixes to barrel with Locktite so it sets more accurately than those that use a grub screw that will pull it to one side. These are Made with the standard...
£18.00
Dovetail Rail, Flat bottom 5 inches long
Dove tail rail with a standard 3/8th rail with a Curved Bottom or Flat bottom, for guns with a round or flat cylinder top. Select in the options. Some of the older guns did not have a dovetail rail, so...
£14.95
Feinwerkbau Sport Stainles Steel Rear Nut Stud
Feinwerkbau Sport Stainless Steel Nut. This takes the stock screw and also holds the rear into the cylinder. Spare in case you have lost yours or have a thread that is stripped or crosthreaded. This part...
£14.92
Heavy Duty Breech Seal for nearly all guns
Very easy to replace, Heavy Duty Breech Seal for most guns. I have made these Heavy Duty Breech Seals to help contain the extra pressure when you tune a spring airgun. A lot of enthusiasts forget the the...
£6.74
Pair Stainless Steel Swivel Studs
Stainless Steel Swivel Studs A pair of Swivel Studs one short and one long to fix a sling to your stock. Picture shows our stock of studs. These are Stainless Steel not mild steel.
£11.75
Silencer Adaptor Larger ID 18 mm
Silencer Adaptor Made from Aluminium for lightweight. Fixes to barrel with Locktite so it sets more accurately than those that use a grub screw that will pull it to one side. These are Made with the standard...
£21.50
Silencer Adaptors All Airguns, Nearly.
Silencer Adaptor Made from Aluminium for lightweight. Fixes to barrel with Locktite so it sets more accurately than those that use a grub screw that will pull it to one side. These are Made with the standard...
£15.00
Silencer Thread Protector Acetal
Barrel Silencer Thread Protector Standard 1/2" UNF Fitting. Extra long to cover 99% or guns even Rim fire. Protects Barrel tip and edges as well as the thread, unlike other types. Made of black Acetal...
£14.99
Silencer Thread Protector Ally Large
Barrel Silencer Thread Protector Standard 1/2" UNF Fitting. Photo shows the actual thread protector. Extra long (16.9mm) and large Diameter (18.8mm) to cover 99% or guns even Rim fire. Protects Barrel...
£9.55
Silencer Thread Protector Aluminium large. Black.
Barrel Silencer Thread Protector Standard 1/2" UNF Fitting. Made of Aluminium to fit the standard 1/2" UNF thread and will fit 99% or guns even Rim fire. Protects Barrel tip and edges as well as the thread,...
£9.75
Silencer Thread Protector Aluminium small. Natural colour
Barrel Silencer Thread Protector Standard 1/2" UNF Fitting. Made of Aluminium to fit the standard 1/2" UNF thread and will fit 99% or guns even Rim fire. Natural colour of Aluminium to take slight knocks...
£6.99
Silencer Thread Protector Natural colour Aluminium Xtra long at 17 mm
Barrel Silencer Thread Protector Standard 1/2" UNF Fitting. Photo shows the Protector and the sizes of it in the Vernier. Size is approximate but can do a specific size if you prefer, but this will obviously...
£16.99
SMK 700 GreenGrip target pistol aluminium Silencer adaptor.
New SMK 700W Green Grip (THESE WILL NOT FIT THE ARTEMIS BLACK GRIP See Photo) Pre Charge target pistol silencer adaptor with the standard 1/2" UNF thread, Natural Aluminium colour. Allows you to use the...
£25.95
SMK 900 Rifle Stainless Steel Valve Body No Seals
New SMK 900 Co2 Rifle Stainless Steel Valve body. The Exhaust Valve and a fraction longer Exhaust Valve is also available on this site. Seal sets are available on this site. Bargain price introductory...
£43.95
SMK CP1 900 Stainless Steel longer .22 Bolt Probe.
SMK 900 Pre Charge Rifle Stainless Steel Longer Bolt Probe for .22. Moves the pellet 1.5 mm further forward to clear the transfer port for more power. You can modify if required to blue print the pellet...
£19.95
SMK CP1 Co2 pistol seal set of O rings
New SMK CP1 Co2 target pistol Set of O ring seal set with a small sachet of Moly 33 O ring and seal lubricant. I have made the new Seals for the Co2 bottle now and have added the full set with the Co2...
£8.95
SMK CP1 Co2 Stainless Steel Valve Body No seals etc
New SMK CP1 Co2 target pistol Stainless Steel Valve body. Exhaust Valve and cap also available. Includes Front and rear and pointed piercer and nut but not the seals. Seal sets are available on this site....
£49.93
SMK CP1 Co2 target pistol High Quality Barrel
New SMK CP1 Co2 target pistol Barrel (in the white, not blued) made to fit. These are made to order. Call in to buy, or give an RFD address for delivery (UK). Barrel length is limited to 10 inch in the...
£98.00
SMK CP1/2 900 1 X Stainless Steel Transfer Ports Select Hole size
SMK CP1 CP2 Co2 pistol and 900 rifle and all the similar types. Stainless Steel Transfer Port. Select hole size from the option drop down tab. Sizes available are 2.0mm hole. 2.5mm hole. 3.0mm hole. 3.5mm...
£8.80
SMK CP1/2 900 Hammer spring assortment of 4 Only No SG
New SMK CP1 Co2 target pistol Set of three different hammer springs of various sizes to fit our Stainless Steel or Brass Spring guide (not supplied). Our Stainless Steel or Brass Spring Guide can be added...
£16.45
SMK CP1/2 900 Longer Stainless Steel BH + 22 or 177 Bolt Probe
SMK CP 1 and 2 Longer Stainless Bolt Probe and larger Bolt Handle for .22 or .177 the .177 is made 1.5 mm longer. Clears Transfer port for more power and accuracy. To get the best it is best to have a...
£33.95
SMK CP1/2 900 Packet of 3 X Stainless Steel T. P. 3.5 mm 2.00 mm and 3 mm
SMK CP1 Co2 pistol and 900 rifle, set of three different size Stainless Steel Transfer Ports with a 3.5 mm 2.00 mm and 3.00 mm hole. Allowing you to fine tune the gun to your requirements if you are tuning...
£13.95
SMK CP1/2 900 S.S. Exhaust Valve St length or Longer option
New SMK CP1 Co2 target pistol Stainless Steel Exhaust Valve. Made the same as the standard but of high quality Stainless Steel and a new head. Picture shows one valve together and one apart, but you just...
£18.95
SMK CP1/2 900 Stainless Steel Larger Bolt Handle 16mm
SMK 900 Pre Charge Rifle Stainless Steel Larger Bolt Handle 16 mm diameter. I find this even easier to grip and load over the standard small one. The option below allows you buy the Bolt handle and the...
£18.96
SMK CP1/2 900 Stainless Steel Larger Bolt Handle 16mm only
SMK 900 Pre Charge Rifle Stainless Steel Larger Bolt Handle 16 mm diameter. I find this even easier to grip and load over the standard small one. If you want the bolt probes then select the other CP1/2/900...
£19.96
SMK CP1/2 900 Stainless Steel Spring Guide
SMK CP1 CP2 Co2 pistol and 900 rifle and all the similar types. Stainless Steel Spring Guide.
£9.98
SMK CP1/CP2/900 Co2 target pistol Stainless Steel adjustable Hammer
New SMK CP1 Co2 target pistol Stainless Steel Adjustable Hammer. Comes with Allen key to lock your desired adjustment. Undo the small Allen grub screw to adjust. When correct setting is found then lock...
£33.89
SMK CP1/CP2/900 Rear Cap in Stainless Steel etc.
New SMK CP1 Co2 target pistol Rear Cap in Stainless Steel. I have also put the Extra long Stainless Steel Spring Guide as an option in the options tab below. Also an option for a Longer and Stronger Hammer...
£12.72
SMK CP2 Co2 Stainless Steel Valve Body No seals etc.
New SMK CP2 Co2 target pistol Stainless Steel Valve body. Exhaust Valve and cap also available. Includes Front and rear and pointed piercer and nut but not the seals. Seal sets are available on this site....
£47.93
SMK QB/XS/TH 78/79 Stainless Steel rearset Trigger T.Kit
SMK QB/XS 78/79 Solid Stainless Steel , 6mm wide, rear set Trigger to make the trigger position much more comfortable and to give smoother and easier control of the trigger pull. If you want try the feel...
£29.74
Stainless Steel Swivel Stud for HW 100 front end
Stainless Steel Swivel Stud for the front end of the HW 100 to fix a sling to the front of your stock. Picture shows our stock of studs, but I will put a photo of them soon. These are Stainless Steel not...
£9.50
Stainless Steel Swivel Stud long or Short.
Stainless Steel Swivel Stud short or long. Select long or short in the options. A single stud, short or long to fix a sling to your stock. Use the short one for the front where the depth of wood is not...
£6.00
Weihrauch Silencer Accuracy kit
HW Silencer Accuracy Kit. Can help if you have a Weihrauch Silencer that is affecting the accuracy. Because the HW Silencer has a relatively small bore through the middle baffles, it can often affect the...
£14.95
Shopping Basket
items 0
Price £0.00
Checkout