Theoben Rapid 7 Mk 1 & 2 etc Modified body + Stronger Ex valve and seals deal

R7bv

£52.00 inc. tax

Theoben Rapid 7 Mk 1 & 2 etc Modified body + Stronger Ex valve and seals deal

Add to Cart

Add To Wishlist

Theoben Rapid 7 Mk 1 & 2 etc Modified body + Stronger Ex valve and seals deal Summary

Theoben Rapid 7 Mk 1 & 2 etc Modified body + Stronger Ex valve and seals deal

Theoben Rapid 7 Modified plastic exhaust valve body with a larger hole and a matching stainless steel modified longer exhaust valve as a matched pair. Exhaust Valve is made a fraction stronger and longer for all models. Sub 12 and FAC types.

Easier to fit than the older Stainless Steel valve bodies.

Includes a set of seals and a sachet of Seal Lubricant for assembly.
Direct replacement for the old Stainless Steel body or the later standard Plastic original item.
It is always advisable to fit the valve body with a new valve, so you have a matched pair, as it is unlikely to seal unless you put both in.

Check power after fitting this high power set to make sure you do not exceed the power of your country. Power can be adjusted with the rear screw. Unscrewing will reduce power, or cutting a coil off the Hammer spring. If required we do a set of four different hammer springs so you can set your gun just right. Ideally just under the 12 ft lb but easy to cock. Even FAC ones should not be hard to cock. The Exhaust vavles will bend if hit too hard even these stronger ones, so don't use brute force for tuning.

If you have a bent exhaust valve then you will certainly need to replace both. This is because the bent valve would have dented the old bodies sealing face.
Fits Mk 1 and 2 etc Rapids.

Brand:

T R Robb

Product Condition:

New

Updating Order Details

Please do not refresh or navigate away from the page!

Theoben Rapid 7 Mk 1 & 2 etc Modified body + Stronger Ex valve and seals deal

Theoben Rapid 7 Mk 1 & 2 etc Modified body + Stronger Ex valve and seals deal

Modal Dialog Title