Product Categories
Theoben Rapid 7 Adjustable Hammer conversion Rapid 7
R7hmr
£7.95 inc. tax
Theoben Rapid 7 Adjustable Hammer conversion Rapid 7 Summary

Theoben Rapid 7 Adjustable Hammer conversion Rapid 7

Adjustable Hammer conversion for the Rapid 7 later models that have a fixed hammer. This makes the hammer adjustable so you can adjust the locktime and control the power easier with a faster lock time, this also helps when you have different hammer springs.
After removing the hammer you have to then remove the fixed stud by heating the front to break the Locktite that holds the stud secure. See our DVD on Tuning the Rapid 7

For more advanced:
When you have found the setting then you can shorten the inside of the adjusting screw to allow the full inertia travel only if required.
Just keep the the end of the adjusting screw level with the bottom of the hammer.

This will not fit our adjustable hammer because ours has a different thread.
The earlier Rapids already have an adjustable hammer. See our DVD if you are not sure.

Always check the power to make sure the gun does not exceed your limit, after changing any parts.
Product Condition:
New
Product Added to your Cart
x

-------- OR --------