SMK XS 78 +TH/QB 78 or 79+ Tuning kit.

78/79 kitd
£45.90 inc. tax
XS 78*
SMK XS 78 +TH/QB 78 or 79+ Tuning kit. Summary

SMK XS 78 +TH/QB 78 or 79+ Tuning kit.

Professional Tuning Kit without the DVD (Video is on this site to view for free, so making it easy to fit. Just replace the new modified stuff for the old that you have taken out. Out of the thousands sold I have only had two customers who failed, the reason they had failed was because they had simply put the rearspring guide in first instead of the hammer. for the SMK QB/XS/TH 78/+79+ models (not the Match, but you can send your own bolt for modification or select a Stainless one in the options). Saves you bodging it up and makes it more reliable with British made parts.

Includes modified Steel Pellet probe, our modified exhaust valve (our shaft is made of Stainless Steel and unscrews from the Brass head for easy seal replacement, unlike the std throw away one), stainless steel piercer, an Aluminium Piercer body**, Moly 33 grease, Modified Steel Valve block, MS 1 lube, and a full set of high quality replacement seals including the transfer port. These seals will last.
The oil is used to lubricate metal to metal moving parts, like the bolt probe etc. The sachet of lube is for the seals.




The standard power of these guns is only 6 to 8 ft lbs and this kit brings them nearer the 12 ft lbs limit for hunting and vermin control. Check the power if it is a .22 after fitting to make sure the gun does not exceed 12 ft lbs. Make sure you use a reputable high quality Chronograph because we have had some customers worried that their guns have gone over or are well under after fitting our kit, only to find when it is checked on a proper chronograph that it is doing very well at 11.5 ft lbs.


Don't forget to state which calibre you require or .22 will be sent. 
+Please note that the 79 models are a bit more to cover the price with extra high Quality O rings.+++++ I am not so keen on the 79 as it has more places to leak and the bottles are then wasted if you get a leak. So keep a check on the Gas Bottel Nose Seal and replace if it shows signs of wear.
Always check the power to make sure the gun does not exceed the limit of your country, after changing any parts.
NOTE
**Modified piercer body eliminates original filter, washer, tube & gauze. DO NOT try to fit the filter tube or gauze in our Piercer body, our Piercer Body is made to be more efficient than the standard and made of High Quality Aircraft grade Aluminium.

On a few rare instances we have found that some XS/QBs can lock up when you tighten the top screws that hold the breech down, if yours does this then it is worth checking that your hammer operating pins are not too long. There is a square pin at the back and the round one at the front. If yours is locking up when you tighten the top screws then taking 2 to 3 mm off the bottom of these should free it up.

You can watch the video for free on this site under SMK Strip down Tuning Video on the left side panel store links, at the moment it is the fourth one down. Or you can add the DVD with the kit under the Options tab to have your own copy so you can view even without the internet.

Most of this kit will fit the new match side lever rifle except the bolt probe which is different. But if you still want a kit for the Match then you can add the different Match Bolt probe under the option tab for another £9.97 or then you can send me your standard Bolt probe and I can modify it so you will have the full kit. Also note that the Match Bolt Probe will only fit the Match, not the XSQBs.

I have added the option for the barrel screw (Allen screw) that goes under the bolt probe to hold the barrel down, in case you have damaged the standard one.
Brand:
T R Robb
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Shopping Basket
items 0
Price £0.00
Checkout
Product Added to your Cart
x

-------- OR --------